forked from mirrors/linux
		
	 1347c94f73
			
		
	
	
		1347c94f73
		
	
	
	
	
		
			
			Use the new helper devm_platform_ioremap_resource() which wraps the platform_get_resource() and devm_ioremap_resource() together, to simplify the code. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Mukesh Ojha <mojha@codeaurora.org> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
		
			
				
	
	
		
			357 lines
		
	
	
	
		
			8.7 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
			
		
		
	
	
			357 lines
		
	
	
	
		
			8.7 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
| // SPDX-License-Identifier: GPL-2.0
 | |
| /*
 | |
|  * simple driver for PWM (Pulse Width Modulator) controller
 | |
|  *
 | |
|  * Derived from pxa PWM driver by eric miao <eric.miao@marvell.com>
 | |
|  */
 | |
| 
 | |
| #include <linux/bitfield.h>
 | |
| #include <linux/bitops.h>
 | |
| #include <linux/clk.h>
 | |
| #include <linux/delay.h>
 | |
| #include <linux/err.h>
 | |
| #include <linux/io.h>
 | |
| #include <linux/kernel.h>
 | |
| #include <linux/module.h>
 | |
| #include <linux/of.h>
 | |
| #include <linux/of_device.h>
 | |
| #include <linux/platform_device.h>
 | |
| #include <linux/pwm.h>
 | |
| #include <linux/slab.h>
 | |
| 
 | |
| #define MX3_PWMCR			0x00    /* PWM Control Register */
 | |
| #define MX3_PWMSR			0x04    /* PWM Status Register */
 | |
| #define MX3_PWMSAR			0x0C    /* PWM Sample Register */
 | |
| #define MX3_PWMPR			0x10    /* PWM Period Register */
 | |
| 
 | |
| #define MX3_PWMCR_FWM			GENMASK(27, 26)
 | |
| #define MX3_PWMCR_STOPEN		BIT(25)
 | |
| #define MX3_PWMCR_DOZEN			BIT(24)
 | |
| #define MX3_PWMCR_WAITEN		BIT(23)
 | |
| #define MX3_PWMCR_DBGEN			BIT(22)
 | |
| #define MX3_PWMCR_BCTR			BIT(21)
 | |
| #define MX3_PWMCR_HCTR			BIT(20)
 | |
| 
 | |
| #define MX3_PWMCR_POUTC			GENMASK(19, 18)
 | |
| #define MX3_PWMCR_POUTC_NORMAL		0
 | |
| #define MX3_PWMCR_POUTC_INVERTED	1
 | |
| #define MX3_PWMCR_POUTC_OFF		2
 | |
| 
 | |
| #define MX3_PWMCR_CLKSRC		GENMASK(17, 16)
 | |
| #define MX3_PWMCR_CLKSRC_OFF		0
 | |
| #define MX3_PWMCR_CLKSRC_IPG		1
 | |
| #define MX3_PWMCR_CLKSRC_IPG_HIGH	2
 | |
| #define MX3_PWMCR_CLKSRC_IPG_32K	3
 | |
| 
 | |
| #define MX3_PWMCR_PRESCALER		GENMASK(15, 4)
 | |
| 
 | |
| #define MX3_PWMCR_SWR			BIT(3)
 | |
| 
 | |
| #define MX3_PWMCR_REPEAT		GENMASK(2, 1)
 | |
| #define MX3_PWMCR_REPEAT_1X		0
 | |
| #define MX3_PWMCR_REPEAT_2X		1
 | |
| #define MX3_PWMCR_REPEAT_4X		2
 | |
| #define MX3_PWMCR_REPEAT_8X		3
 | |
| 
 | |
| #define MX3_PWMCR_EN			BIT(0)
 | |
| 
 | |
| #define MX3_PWMSR_FWE			BIT(6)
 | |
| #define MX3_PWMSR_CMP			BIT(5)
 | |
| #define MX3_PWMSR_ROV			BIT(4)
 | |
| #define MX3_PWMSR_FE			BIT(3)
 | |
| 
 | |
| #define MX3_PWMSR_FIFOAV		GENMASK(2, 0)
 | |
| #define MX3_PWMSR_FIFOAV_EMPTY		0
 | |
| #define MX3_PWMSR_FIFOAV_1WORD		1
 | |
| #define MX3_PWMSR_FIFOAV_2WORDS		2
 | |
| #define MX3_PWMSR_FIFOAV_3WORDS		3
 | |
| #define MX3_PWMSR_FIFOAV_4WORDS		4
 | |
| 
 | |
| #define MX3_PWMCR_PRESCALER_SET(x)	FIELD_PREP(MX3_PWMCR_PRESCALER, (x) - 1)
 | |
| #define MX3_PWMCR_PRESCALER_GET(x)	(FIELD_GET(MX3_PWMCR_PRESCALER, \
 | |
| 						   (x)) + 1)
 | |
| 
 | |
| #define MX3_PWM_SWR_LOOP		5
 | |
| 
 | |
| /* PWMPR register value of 0xffff has the same effect as 0xfffe */
 | |
| #define MX3_PWMPR_MAX			0xfffe
 | |
| 
 | |
| struct pwm_imx27_chip {
 | |
| 	struct clk	*clk_ipg;
 | |
| 	struct clk	*clk_per;
 | |
| 	void __iomem	*mmio_base;
 | |
| 	struct pwm_chip	chip;
 | |
| };
 | |
| 
 | |
| #define to_pwm_imx27_chip(chip)	container_of(chip, struct pwm_imx27_chip, chip)
 | |
| 
 | |
| static int pwm_imx27_clk_prepare_enable(struct pwm_chip *chip)
 | |
| {
 | |
| 	struct pwm_imx27_chip *imx = to_pwm_imx27_chip(chip);
 | |
| 	int ret;
 | |
| 
 | |
| 	ret = clk_prepare_enable(imx->clk_ipg);
 | |
| 	if (ret)
 | |
| 		return ret;
 | |
| 
 | |
| 	ret = clk_prepare_enable(imx->clk_per);
 | |
| 	if (ret) {
 | |
| 		clk_disable_unprepare(imx->clk_ipg);
 | |
| 		return ret;
 | |
| 	}
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static void pwm_imx27_clk_disable_unprepare(struct pwm_chip *chip)
 | |
| {
 | |
| 	struct pwm_imx27_chip *imx = to_pwm_imx27_chip(chip);
 | |
| 
 | |
| 	clk_disable_unprepare(imx->clk_per);
 | |
| 	clk_disable_unprepare(imx->clk_ipg);
 | |
| }
 | |
| 
 | |
| static void pwm_imx27_get_state(struct pwm_chip *chip,
 | |
| 				struct pwm_device *pwm, struct pwm_state *state)
 | |
| {
 | |
| 	struct pwm_imx27_chip *imx = to_pwm_imx27_chip(chip);
 | |
| 	u32 period, prescaler, pwm_clk, val;
 | |
| 	u64 tmp;
 | |
| 	int ret;
 | |
| 
 | |
| 	ret = pwm_imx27_clk_prepare_enable(chip);
 | |
| 	if (ret < 0)
 | |
| 		return;
 | |
| 
 | |
| 	val = readl(imx->mmio_base + MX3_PWMCR);
 | |
| 
 | |
| 	if (val & MX3_PWMCR_EN)
 | |
| 		state->enabled = true;
 | |
| 	else
 | |
| 		state->enabled = false;
 | |
| 
 | |
| 	switch (FIELD_GET(MX3_PWMCR_POUTC, val)) {
 | |
| 	case MX3_PWMCR_POUTC_NORMAL:
 | |
| 		state->polarity = PWM_POLARITY_NORMAL;
 | |
| 		break;
 | |
| 	case MX3_PWMCR_POUTC_INVERTED:
 | |
| 		state->polarity = PWM_POLARITY_INVERSED;
 | |
| 		break;
 | |
| 	default:
 | |
| 		dev_warn(chip->dev, "can't set polarity, output disconnected");
 | |
| 	}
 | |
| 
 | |
| 	prescaler = MX3_PWMCR_PRESCALER_GET(val);
 | |
| 	pwm_clk = clk_get_rate(imx->clk_per);
 | |
| 	pwm_clk = DIV_ROUND_CLOSEST_ULL(pwm_clk, prescaler);
 | |
| 	val = readl(imx->mmio_base + MX3_PWMPR);
 | |
| 	period = val >= MX3_PWMPR_MAX ? MX3_PWMPR_MAX : val;
 | |
| 
 | |
| 	/* PWMOUT (Hz) = PWMCLK / (PWMPR + 2) */
 | |
| 	tmp = NSEC_PER_SEC * (u64)(period + 2);
 | |
| 	state->period = DIV_ROUND_CLOSEST_ULL(tmp, pwm_clk);
 | |
| 
 | |
| 	/* PWMSAR can be read only if PWM is enabled */
 | |
| 	if (state->enabled) {
 | |
| 		val = readl(imx->mmio_base + MX3_PWMSAR);
 | |
| 		tmp = NSEC_PER_SEC * (u64)(val);
 | |
| 		state->duty_cycle = DIV_ROUND_CLOSEST_ULL(tmp, pwm_clk);
 | |
| 	} else {
 | |
| 		state->duty_cycle = 0;
 | |
| 	}
 | |
| 
 | |
| 	if (!state->enabled)
 | |
| 		pwm_imx27_clk_disable_unprepare(chip);
 | |
| }
 | |
| 
 | |
| static void pwm_imx27_sw_reset(struct pwm_chip *chip)
 | |
| {
 | |
| 	struct pwm_imx27_chip *imx = to_pwm_imx27_chip(chip);
 | |
| 	struct device *dev = chip->dev;
 | |
| 	int wait_count = 0;
 | |
| 	u32 cr;
 | |
| 
 | |
| 	writel(MX3_PWMCR_SWR, imx->mmio_base + MX3_PWMCR);
 | |
| 	do {
 | |
| 		usleep_range(200, 1000);
 | |
| 		cr = readl(imx->mmio_base + MX3_PWMCR);
 | |
| 	} while ((cr & MX3_PWMCR_SWR) &&
 | |
| 		 (wait_count++ < MX3_PWM_SWR_LOOP));
 | |
| 
 | |
| 	if (cr & MX3_PWMCR_SWR)
 | |
| 		dev_warn(dev, "software reset timeout\n");
 | |
| }
 | |
| 
 | |
| static void pwm_imx27_wait_fifo_slot(struct pwm_chip *chip,
 | |
| 				     struct pwm_device *pwm)
 | |
| {
 | |
| 	struct pwm_imx27_chip *imx = to_pwm_imx27_chip(chip);
 | |
| 	struct device *dev = chip->dev;
 | |
| 	unsigned int period_ms;
 | |
| 	int fifoav;
 | |
| 	u32 sr;
 | |
| 
 | |
| 	sr = readl(imx->mmio_base + MX3_PWMSR);
 | |
| 	fifoav = FIELD_GET(MX3_PWMSR_FIFOAV, sr);
 | |
| 	if (fifoav == MX3_PWMSR_FIFOAV_4WORDS) {
 | |
| 		period_ms = DIV_ROUND_UP(pwm_get_period(pwm),
 | |
| 					 NSEC_PER_MSEC);
 | |
| 		msleep(period_ms);
 | |
| 
 | |
| 		sr = readl(imx->mmio_base + MX3_PWMSR);
 | |
| 		if (fifoav == FIELD_GET(MX3_PWMSR_FIFOAV, sr))
 | |
| 			dev_warn(dev, "there is no free FIFO slot\n");
 | |
| 	}
 | |
| }
 | |
| 
 | |
| static int pwm_imx27_apply(struct pwm_chip *chip, struct pwm_device *pwm,
 | |
| 			   struct pwm_state *state)
 | |
| {
 | |
| 	unsigned long period_cycles, duty_cycles, prescale;
 | |
| 	struct pwm_imx27_chip *imx = to_pwm_imx27_chip(chip);
 | |
| 	struct pwm_state cstate;
 | |
| 	unsigned long long c;
 | |
| 	int ret;
 | |
| 	u32 cr;
 | |
| 
 | |
| 	pwm_get_state(pwm, &cstate);
 | |
| 
 | |
| 	if (state->enabled) {
 | |
| 		c = clk_get_rate(imx->clk_per);
 | |
| 		c *= state->period;
 | |
| 
 | |
| 		do_div(c, 1000000000);
 | |
| 		period_cycles = c;
 | |
| 
 | |
| 		prescale = period_cycles / 0x10000 + 1;
 | |
| 
 | |
| 		period_cycles /= prescale;
 | |
| 		c = (unsigned long long)period_cycles * state->duty_cycle;
 | |
| 		do_div(c, state->period);
 | |
| 		duty_cycles = c;
 | |
| 
 | |
| 		/*
 | |
| 		 * according to imx pwm RM, the real period value should be
 | |
| 		 * PERIOD value in PWMPR plus 2.
 | |
| 		 */
 | |
| 		if (period_cycles > 2)
 | |
| 			period_cycles -= 2;
 | |
| 		else
 | |
| 			period_cycles = 0;
 | |
| 
 | |
| 		/*
 | |
| 		 * Wait for a free FIFO slot if the PWM is already enabled, and
 | |
| 		 * flush the FIFO if the PWM was disabled and is about to be
 | |
| 		 * enabled.
 | |
| 		 */
 | |
| 		if (cstate.enabled) {
 | |
| 			pwm_imx27_wait_fifo_slot(chip, pwm);
 | |
| 		} else {
 | |
| 			ret = pwm_imx27_clk_prepare_enable(chip);
 | |
| 			if (ret)
 | |
| 				return ret;
 | |
| 
 | |
| 			pwm_imx27_sw_reset(chip);
 | |
| 		}
 | |
| 
 | |
| 		writel(duty_cycles, imx->mmio_base + MX3_PWMSAR);
 | |
| 		writel(period_cycles, imx->mmio_base + MX3_PWMPR);
 | |
| 
 | |
| 		cr = MX3_PWMCR_PRESCALER_SET(prescale) |
 | |
| 		     MX3_PWMCR_STOPEN | MX3_PWMCR_DOZEN | MX3_PWMCR_WAITEN |
 | |
| 		     FIELD_PREP(MX3_PWMCR_CLKSRC, MX3_PWMCR_CLKSRC_IPG_HIGH) |
 | |
| 		     MX3_PWMCR_DBGEN | MX3_PWMCR_EN;
 | |
| 
 | |
| 		if (state->polarity == PWM_POLARITY_INVERSED)
 | |
| 			cr |= FIELD_PREP(MX3_PWMCR_POUTC,
 | |
| 					MX3_PWMCR_POUTC_INVERTED);
 | |
| 
 | |
| 		writel(cr, imx->mmio_base + MX3_PWMCR);
 | |
| 	} else if (cstate.enabled) {
 | |
| 		writel(0, imx->mmio_base + MX3_PWMCR);
 | |
| 
 | |
| 		pwm_imx27_clk_disable_unprepare(chip);
 | |
| 	}
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static const struct pwm_ops pwm_imx27_ops = {
 | |
| 	.apply = pwm_imx27_apply,
 | |
| 	.get_state = pwm_imx27_get_state,
 | |
| 	.owner = THIS_MODULE,
 | |
| };
 | |
| 
 | |
| static const struct of_device_id pwm_imx27_dt_ids[] = {
 | |
| 	{ .compatible = "fsl,imx27-pwm", },
 | |
| 	{ /* sentinel */ }
 | |
| };
 | |
| MODULE_DEVICE_TABLE(of, pwm_imx27_dt_ids);
 | |
| 
 | |
| static int pwm_imx27_probe(struct platform_device *pdev)
 | |
| {
 | |
| 	struct pwm_imx27_chip *imx;
 | |
| 
 | |
| 	imx = devm_kzalloc(&pdev->dev, sizeof(*imx), GFP_KERNEL);
 | |
| 	if (imx == NULL)
 | |
| 		return -ENOMEM;
 | |
| 
 | |
| 	platform_set_drvdata(pdev, imx);
 | |
| 
 | |
| 	imx->clk_ipg = devm_clk_get(&pdev->dev, "ipg");
 | |
| 	if (IS_ERR(imx->clk_ipg)) {
 | |
| 		dev_err(&pdev->dev, "getting ipg clock failed with %ld\n",
 | |
| 				PTR_ERR(imx->clk_ipg));
 | |
| 		return PTR_ERR(imx->clk_ipg);
 | |
| 	}
 | |
| 
 | |
| 	imx->clk_per = devm_clk_get(&pdev->dev, "per");
 | |
| 	if (IS_ERR(imx->clk_per)) {
 | |
| 		int ret = PTR_ERR(imx->clk_per);
 | |
| 
 | |
| 		if (ret != -EPROBE_DEFER)
 | |
| 			dev_err(&pdev->dev,
 | |
| 				"failed to get peripheral clock: %d\n",
 | |
| 				ret);
 | |
| 
 | |
| 		return ret;
 | |
| 	}
 | |
| 
 | |
| 	imx->chip.ops = &pwm_imx27_ops;
 | |
| 	imx->chip.dev = &pdev->dev;
 | |
| 	imx->chip.base = -1;
 | |
| 	imx->chip.npwm = 1;
 | |
| 
 | |
| 	imx->chip.of_xlate = of_pwm_xlate_with_flags;
 | |
| 	imx->chip.of_pwm_n_cells = 3;
 | |
| 
 | |
| 	imx->mmio_base = devm_platform_ioremap_resource(pdev, 0);
 | |
| 	if (IS_ERR(imx->mmio_base))
 | |
| 		return PTR_ERR(imx->mmio_base);
 | |
| 
 | |
| 	return pwmchip_add(&imx->chip);
 | |
| }
 | |
| 
 | |
| static int pwm_imx27_remove(struct platform_device *pdev)
 | |
| {
 | |
| 	struct pwm_imx27_chip *imx;
 | |
| 
 | |
| 	imx = platform_get_drvdata(pdev);
 | |
| 
 | |
| 	pwm_imx27_clk_disable_unprepare(&imx->chip);
 | |
| 
 | |
| 	return pwmchip_remove(&imx->chip);
 | |
| }
 | |
| 
 | |
| static struct platform_driver imx_pwm_driver = {
 | |
| 	.driver = {
 | |
| 		.name = "pwm-imx27",
 | |
| 		.of_match_table = pwm_imx27_dt_ids,
 | |
| 	},
 | |
| 	.probe = pwm_imx27_probe,
 | |
| 	.remove = pwm_imx27_remove,
 | |
| };
 | |
| module_platform_driver(imx_pwm_driver);
 | |
| 
 | |
| MODULE_LICENSE("GPL v2");
 | |
| MODULE_AUTHOR("Sascha Hauer <s.hauer@pengutronix.de>");
 |