forked from mirrors/linux
		
	Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation # extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 4122 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Enrico Weigelt <info@metux.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
		
			
				
	
	
		
			408 lines
		
	
	
	
		
			10 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
			
		
		
	
	
			408 lines
		
	
	
	
		
			10 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
// SPDX-License-Identifier: GPL-2.0-only
 | 
						|
/*
 | 
						|
 * Regulator driver for PWM Regulators
 | 
						|
 *
 | 
						|
 * Copyright (C) 2014 - STMicroelectronics Inc.
 | 
						|
 *
 | 
						|
 * Author: Lee Jones <lee.jones@linaro.org>
 | 
						|
 */
 | 
						|
 | 
						|
#include <linux/module.h>
 | 
						|
#include <linux/init.h>
 | 
						|
#include <linux/err.h>
 | 
						|
#include <linux/regulator/driver.h>
 | 
						|
#include <linux/regulator/machine.h>
 | 
						|
#include <linux/regulator/of_regulator.h>
 | 
						|
#include <linux/of.h>
 | 
						|
#include <linux/of_device.h>
 | 
						|
#include <linux/pwm.h>
 | 
						|
#include <linux/gpio/consumer.h>
 | 
						|
 | 
						|
struct pwm_continuous_reg_data {
 | 
						|
	unsigned int min_uV_dutycycle;
 | 
						|
	unsigned int max_uV_dutycycle;
 | 
						|
	unsigned int dutycycle_unit;
 | 
						|
};
 | 
						|
 | 
						|
struct pwm_regulator_data {
 | 
						|
	/*  Shared */
 | 
						|
	struct pwm_device *pwm;
 | 
						|
 | 
						|
	/* Voltage table */
 | 
						|
	struct pwm_voltages *duty_cycle_table;
 | 
						|
 | 
						|
	/* Continuous mode info */
 | 
						|
	struct pwm_continuous_reg_data continuous;
 | 
						|
 | 
						|
	/* regulator descriptor */
 | 
						|
	struct regulator_desc desc;
 | 
						|
 | 
						|
	int state;
 | 
						|
 | 
						|
	/* Enable GPIO */
 | 
						|
	struct gpio_desc *enb_gpio;
 | 
						|
};
 | 
						|
 | 
						|
struct pwm_voltages {
 | 
						|
	unsigned int uV;
 | 
						|
	unsigned int dutycycle;
 | 
						|
};
 | 
						|
 | 
						|
/**
 | 
						|
 * Voltage table call-backs
 | 
						|
 */
 | 
						|
static void pwm_regulator_init_state(struct regulator_dev *rdev)
 | 
						|
{
 | 
						|
	struct pwm_regulator_data *drvdata = rdev_get_drvdata(rdev);
 | 
						|
	struct pwm_state pwm_state;
 | 
						|
	unsigned int dutycycle;
 | 
						|
	int i;
 | 
						|
 | 
						|
	pwm_get_state(drvdata->pwm, &pwm_state);
 | 
						|
	dutycycle = pwm_get_relative_duty_cycle(&pwm_state, 100);
 | 
						|
 | 
						|
	for (i = 0; i < rdev->desc->n_voltages; i++) {
 | 
						|
		if (dutycycle == drvdata->duty_cycle_table[i].dutycycle) {
 | 
						|
			drvdata->state = i;
 | 
						|
			return;
 | 
						|
		}
 | 
						|
	}
 | 
						|
}
 | 
						|
 | 
						|
static int pwm_regulator_get_voltage_sel(struct regulator_dev *rdev)
 | 
						|
{
 | 
						|
	struct pwm_regulator_data *drvdata = rdev_get_drvdata(rdev);
 | 
						|
 | 
						|
	if (drvdata->state < 0)
 | 
						|
		pwm_regulator_init_state(rdev);
 | 
						|
 | 
						|
	return drvdata->state;
 | 
						|
}
 | 
						|
 | 
						|
static int pwm_regulator_set_voltage_sel(struct regulator_dev *rdev,
 | 
						|
					 unsigned selector)
 | 
						|
{
 | 
						|
	struct pwm_regulator_data *drvdata = rdev_get_drvdata(rdev);
 | 
						|
	struct pwm_state pstate;
 | 
						|
	int ret;
 | 
						|
 | 
						|
	pwm_init_state(drvdata->pwm, &pstate);
 | 
						|
	pwm_set_relative_duty_cycle(&pstate,
 | 
						|
			drvdata->duty_cycle_table[selector].dutycycle, 100);
 | 
						|
 | 
						|
	ret = pwm_apply_state(drvdata->pwm, &pstate);
 | 
						|
	if (ret) {
 | 
						|
		dev_err(&rdev->dev, "Failed to configure PWM: %d\n", ret);
 | 
						|
		return ret;
 | 
						|
	}
 | 
						|
 | 
						|
	drvdata->state = selector;
 | 
						|
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
static int pwm_regulator_list_voltage(struct regulator_dev *rdev,
 | 
						|
				      unsigned selector)
 | 
						|
{
 | 
						|
	struct pwm_regulator_data *drvdata = rdev_get_drvdata(rdev);
 | 
						|
 | 
						|
	if (selector >= rdev->desc->n_voltages)
 | 
						|
		return -EINVAL;
 | 
						|
 | 
						|
	return drvdata->duty_cycle_table[selector].uV;
 | 
						|
}
 | 
						|
 | 
						|
static int pwm_regulator_enable(struct regulator_dev *dev)
 | 
						|
{
 | 
						|
	struct pwm_regulator_data *drvdata = rdev_get_drvdata(dev);
 | 
						|
 | 
						|
	gpiod_set_value_cansleep(drvdata->enb_gpio, 1);
 | 
						|
 | 
						|
	return pwm_enable(drvdata->pwm);
 | 
						|
}
 | 
						|
 | 
						|
static int pwm_regulator_disable(struct regulator_dev *dev)
 | 
						|
{
 | 
						|
	struct pwm_regulator_data *drvdata = rdev_get_drvdata(dev);
 | 
						|
 | 
						|
	pwm_disable(drvdata->pwm);
 | 
						|
 | 
						|
	gpiod_set_value_cansleep(drvdata->enb_gpio, 0);
 | 
						|
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
static int pwm_regulator_is_enabled(struct regulator_dev *dev)
 | 
						|
{
 | 
						|
	struct pwm_regulator_data *drvdata = rdev_get_drvdata(dev);
 | 
						|
 | 
						|
	if (drvdata->enb_gpio && !gpiod_get_value_cansleep(drvdata->enb_gpio))
 | 
						|
		return false;
 | 
						|
 | 
						|
	return pwm_is_enabled(drvdata->pwm);
 | 
						|
}
 | 
						|
 | 
						|
static int pwm_regulator_get_voltage(struct regulator_dev *rdev)
 | 
						|
{
 | 
						|
	struct pwm_regulator_data *drvdata = rdev_get_drvdata(rdev);
 | 
						|
	unsigned int min_uV_duty = drvdata->continuous.min_uV_dutycycle;
 | 
						|
	unsigned int max_uV_duty = drvdata->continuous.max_uV_dutycycle;
 | 
						|
	unsigned int duty_unit = drvdata->continuous.dutycycle_unit;
 | 
						|
	int min_uV = rdev->constraints->min_uV;
 | 
						|
	int max_uV = rdev->constraints->max_uV;
 | 
						|
	int diff_uV = max_uV - min_uV;
 | 
						|
	struct pwm_state pstate;
 | 
						|
	unsigned int diff_duty;
 | 
						|
	unsigned int voltage;
 | 
						|
 | 
						|
	pwm_get_state(drvdata->pwm, &pstate);
 | 
						|
 | 
						|
	voltage = pwm_get_relative_duty_cycle(&pstate, duty_unit);
 | 
						|
 | 
						|
	/*
 | 
						|
	 * The dutycycle for min_uV might be greater than the one for max_uV.
 | 
						|
	 * This is happening when the user needs an inversed polarity, but the
 | 
						|
	 * PWM device does not support inversing it in hardware.
 | 
						|
	 */
 | 
						|
	if (max_uV_duty < min_uV_duty) {
 | 
						|
		voltage = min_uV_duty - voltage;
 | 
						|
		diff_duty = min_uV_duty - max_uV_duty;
 | 
						|
	} else {
 | 
						|
		voltage = voltage - min_uV_duty;
 | 
						|
		diff_duty = max_uV_duty - min_uV_duty;
 | 
						|
	}
 | 
						|
 | 
						|
	voltage = DIV_ROUND_CLOSEST_ULL((u64)voltage * diff_uV, diff_duty);
 | 
						|
 | 
						|
	return voltage + min_uV;
 | 
						|
}
 | 
						|
 | 
						|
static int pwm_regulator_set_voltage(struct regulator_dev *rdev,
 | 
						|
				     int req_min_uV, int req_max_uV,
 | 
						|
				     unsigned int *selector)
 | 
						|
{
 | 
						|
	struct pwm_regulator_data *drvdata = rdev_get_drvdata(rdev);
 | 
						|
	unsigned int min_uV_duty = drvdata->continuous.min_uV_dutycycle;
 | 
						|
	unsigned int max_uV_duty = drvdata->continuous.max_uV_dutycycle;
 | 
						|
	unsigned int duty_unit = drvdata->continuous.dutycycle_unit;
 | 
						|
	int min_uV = rdev->constraints->min_uV;
 | 
						|
	int max_uV = rdev->constraints->max_uV;
 | 
						|
	int diff_uV = max_uV - min_uV;
 | 
						|
	struct pwm_state pstate;
 | 
						|
	unsigned int diff_duty;
 | 
						|
	unsigned int dutycycle;
 | 
						|
	int ret;
 | 
						|
 | 
						|
	pwm_init_state(drvdata->pwm, &pstate);
 | 
						|
 | 
						|
	/*
 | 
						|
	 * The dutycycle for min_uV might be greater than the one for max_uV.
 | 
						|
	 * This is happening when the user needs an inversed polarity, but the
 | 
						|
	 * PWM device does not support inversing it in hardware.
 | 
						|
	 */
 | 
						|
	if (max_uV_duty < min_uV_duty)
 | 
						|
		diff_duty = min_uV_duty - max_uV_duty;
 | 
						|
	else
 | 
						|
		diff_duty = max_uV_duty - min_uV_duty;
 | 
						|
 | 
						|
	dutycycle = DIV_ROUND_CLOSEST_ULL((u64)(req_min_uV - min_uV) *
 | 
						|
					  diff_duty,
 | 
						|
					  diff_uV);
 | 
						|
 | 
						|
	if (max_uV_duty < min_uV_duty)
 | 
						|
		dutycycle = min_uV_duty - dutycycle;
 | 
						|
	else
 | 
						|
		dutycycle = min_uV_duty + dutycycle;
 | 
						|
 | 
						|
	pwm_set_relative_duty_cycle(&pstate, dutycycle, duty_unit);
 | 
						|
 | 
						|
	ret = pwm_apply_state(drvdata->pwm, &pstate);
 | 
						|
	if (ret) {
 | 
						|
		dev_err(&rdev->dev, "Failed to configure PWM: %d\n", ret);
 | 
						|
		return ret;
 | 
						|
	}
 | 
						|
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
static const struct regulator_ops pwm_regulator_voltage_table_ops = {
 | 
						|
	.set_voltage_sel = pwm_regulator_set_voltage_sel,
 | 
						|
	.get_voltage_sel = pwm_regulator_get_voltage_sel,
 | 
						|
	.list_voltage    = pwm_regulator_list_voltage,
 | 
						|
	.map_voltage     = regulator_map_voltage_iterate,
 | 
						|
	.enable          = pwm_regulator_enable,
 | 
						|
	.disable         = pwm_regulator_disable,
 | 
						|
	.is_enabled      = pwm_regulator_is_enabled,
 | 
						|
};
 | 
						|
 | 
						|
static const struct regulator_ops pwm_regulator_voltage_continuous_ops = {
 | 
						|
	.get_voltage = pwm_regulator_get_voltage,
 | 
						|
	.set_voltage = pwm_regulator_set_voltage,
 | 
						|
	.enable          = pwm_regulator_enable,
 | 
						|
	.disable         = pwm_regulator_disable,
 | 
						|
	.is_enabled      = pwm_regulator_is_enabled,
 | 
						|
};
 | 
						|
 | 
						|
static const struct regulator_desc pwm_regulator_desc = {
 | 
						|
	.name		= "pwm-regulator",
 | 
						|
	.type		= REGULATOR_VOLTAGE,
 | 
						|
	.owner		= THIS_MODULE,
 | 
						|
	.supply_name    = "pwm",
 | 
						|
};
 | 
						|
 | 
						|
static int pwm_regulator_init_table(struct platform_device *pdev,
 | 
						|
				    struct pwm_regulator_data *drvdata)
 | 
						|
{
 | 
						|
	struct device_node *np = pdev->dev.of_node;
 | 
						|
	struct pwm_voltages *duty_cycle_table;
 | 
						|
	unsigned int length = 0;
 | 
						|
	int ret;
 | 
						|
 | 
						|
	of_find_property(np, "voltage-table", &length);
 | 
						|
 | 
						|
	if ((length < sizeof(*duty_cycle_table)) ||
 | 
						|
	    (length % sizeof(*duty_cycle_table))) {
 | 
						|
		dev_err(&pdev->dev, "voltage-table length(%d) is invalid\n",
 | 
						|
			length);
 | 
						|
		return -EINVAL;
 | 
						|
	}
 | 
						|
 | 
						|
	duty_cycle_table = devm_kzalloc(&pdev->dev, length, GFP_KERNEL);
 | 
						|
	if (!duty_cycle_table)
 | 
						|
		return -ENOMEM;
 | 
						|
 | 
						|
	ret = of_property_read_u32_array(np, "voltage-table",
 | 
						|
					 (u32 *)duty_cycle_table,
 | 
						|
					 length / sizeof(u32));
 | 
						|
	if (ret) {
 | 
						|
		dev_err(&pdev->dev, "Failed to read voltage-table: %d\n", ret);
 | 
						|
		return ret;
 | 
						|
	}
 | 
						|
 | 
						|
	drvdata->state			= -EINVAL;
 | 
						|
	drvdata->duty_cycle_table	= duty_cycle_table;
 | 
						|
	drvdata->desc.ops = &pwm_regulator_voltage_table_ops;
 | 
						|
	drvdata->desc.n_voltages	= length / sizeof(*duty_cycle_table);
 | 
						|
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
static int pwm_regulator_init_continuous(struct platform_device *pdev,
 | 
						|
					 struct pwm_regulator_data *drvdata)
 | 
						|
{
 | 
						|
	u32 dutycycle_range[2] = { 0, 100 };
 | 
						|
	u32 dutycycle_unit = 100;
 | 
						|
 | 
						|
	drvdata->desc.ops = &pwm_regulator_voltage_continuous_ops;
 | 
						|
	drvdata->desc.continuous_voltage_range = true;
 | 
						|
 | 
						|
	of_property_read_u32_array(pdev->dev.of_node,
 | 
						|
				   "pwm-dutycycle-range",
 | 
						|
				   dutycycle_range, 2);
 | 
						|
	of_property_read_u32(pdev->dev.of_node, "pwm-dutycycle-unit",
 | 
						|
			     &dutycycle_unit);
 | 
						|
 | 
						|
	if (dutycycle_range[0] > dutycycle_unit ||
 | 
						|
	    dutycycle_range[1] > dutycycle_unit)
 | 
						|
		return -EINVAL;
 | 
						|
 | 
						|
	drvdata->continuous.dutycycle_unit = dutycycle_unit;
 | 
						|
	drvdata->continuous.min_uV_dutycycle = dutycycle_range[0];
 | 
						|
	drvdata->continuous.max_uV_dutycycle = dutycycle_range[1];
 | 
						|
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
static int pwm_regulator_probe(struct platform_device *pdev)
 | 
						|
{
 | 
						|
	const struct regulator_init_data *init_data;
 | 
						|
	struct pwm_regulator_data *drvdata;
 | 
						|
	struct regulator_dev *regulator;
 | 
						|
	struct regulator_config config = { };
 | 
						|
	struct device_node *np = pdev->dev.of_node;
 | 
						|
	enum gpiod_flags gpio_flags;
 | 
						|
	int ret;
 | 
						|
 | 
						|
	if (!np) {
 | 
						|
		dev_err(&pdev->dev, "Device Tree node missing\n");
 | 
						|
		return -EINVAL;
 | 
						|
	}
 | 
						|
 | 
						|
	drvdata = devm_kzalloc(&pdev->dev, sizeof(*drvdata), GFP_KERNEL);
 | 
						|
	if (!drvdata)
 | 
						|
		return -ENOMEM;
 | 
						|
 | 
						|
	memcpy(&drvdata->desc, &pwm_regulator_desc, sizeof(drvdata->desc));
 | 
						|
 | 
						|
	if (of_find_property(np, "voltage-table", NULL))
 | 
						|
		ret = pwm_regulator_init_table(pdev, drvdata);
 | 
						|
	else
 | 
						|
		ret = pwm_regulator_init_continuous(pdev, drvdata);
 | 
						|
	if (ret)
 | 
						|
		return ret;
 | 
						|
 | 
						|
	init_data = of_get_regulator_init_data(&pdev->dev, np,
 | 
						|
					       &drvdata->desc);
 | 
						|
	if (!init_data)
 | 
						|
		return -ENOMEM;
 | 
						|
 | 
						|
	config.of_node = np;
 | 
						|
	config.dev = &pdev->dev;
 | 
						|
	config.driver_data = drvdata;
 | 
						|
	config.init_data = init_data;
 | 
						|
 | 
						|
	drvdata->pwm = devm_pwm_get(&pdev->dev, NULL);
 | 
						|
	if (IS_ERR(drvdata->pwm)) {
 | 
						|
		ret = PTR_ERR(drvdata->pwm);
 | 
						|
		dev_err(&pdev->dev, "Failed to get PWM: %d\n", ret);
 | 
						|
		return ret;
 | 
						|
	}
 | 
						|
 | 
						|
	if (init_data->constraints.boot_on || init_data->constraints.always_on)
 | 
						|
		gpio_flags = GPIOD_OUT_HIGH;
 | 
						|
	else
 | 
						|
		gpio_flags = GPIOD_OUT_LOW;
 | 
						|
	drvdata->enb_gpio = devm_gpiod_get_optional(&pdev->dev, "enable",
 | 
						|
						    gpio_flags);
 | 
						|
	if (IS_ERR(drvdata->enb_gpio)) {
 | 
						|
		ret = PTR_ERR(drvdata->enb_gpio);
 | 
						|
		dev_err(&pdev->dev, "Failed to get enable GPIO: %d\n", ret);
 | 
						|
		return ret;
 | 
						|
	}
 | 
						|
 | 
						|
	ret = pwm_adjust_config(drvdata->pwm);
 | 
						|
	if (ret)
 | 
						|
		return ret;
 | 
						|
 | 
						|
	regulator = devm_regulator_register(&pdev->dev,
 | 
						|
					    &drvdata->desc, &config);
 | 
						|
	if (IS_ERR(regulator)) {
 | 
						|
		ret = PTR_ERR(regulator);
 | 
						|
		dev_err(&pdev->dev, "Failed to register regulator %s: %d\n",
 | 
						|
			drvdata->desc.name, ret);
 | 
						|
		return ret;
 | 
						|
	}
 | 
						|
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
static const struct of_device_id pwm_of_match[] = {
 | 
						|
	{ .compatible = "pwm-regulator" },
 | 
						|
	{ },
 | 
						|
};
 | 
						|
MODULE_DEVICE_TABLE(of, pwm_of_match);
 | 
						|
 | 
						|
static struct platform_driver pwm_regulator_driver = {
 | 
						|
	.driver = {
 | 
						|
		.name		= "pwm-regulator",
 | 
						|
		.of_match_table = of_match_ptr(pwm_of_match),
 | 
						|
	},
 | 
						|
	.probe = pwm_regulator_probe,
 | 
						|
};
 | 
						|
 | 
						|
module_platform_driver(pwm_regulator_driver);
 | 
						|
 | 
						|
MODULE_LICENSE("GPL");
 | 
						|
MODULE_AUTHOR("Lee Jones <lee.jones@linaro.org>");
 | 
						|
MODULE_DESCRIPTION("PWM Regulator Driver");
 | 
						|
MODULE_ALIAS("platform:pwm-regulator");
 |