forked from mirrors/linux
		
	 f0967eea80
			
		
	
	
		f0967eea80
		
	
	
	
	
		
			
			This patch converts the drivers in drivers/hwmon/* to use the module_i2c_driver() macro which makes the code smaller and a bit simpler. Signed-off-by: Axel Lin <axel.lin@gmail.com> Cc: Corentin Labbe <corentin.labbe@geomatys.fr> Cc: Dirk Eibach <eibach@gdsys.de> Cc: "Mark M. Hoffman" <mhoffman@lightlink.com> Cc: Steve Glendinning <steve.glendinning@smsc.com> Cc: Riku Voipio <riku.voipio@iki.fi> Cc: Guillaume Ligneul <guillaume.ligneul@gmail.com> Cc: David George <david.george@ska.ac.za> Cc: "Hans J. Koch" <hjk@hansjkoch.de> Cc: Marc Hulsman <m.hulsman@tudelft.nl> Cc: Rudolf Marek <r.marek@assembler.cz> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
		
			
				
	
	
		
			332 lines
		
	
	
	
		
			8.3 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
			
		
		
	
	
			332 lines
		
	
	
	
		
			8.3 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
| /* tmp421.c
 | |
|  *
 | |
|  * Copyright (C) 2009 Andre Prendel <andre.prendel@gmx.de>
 | |
|  * Preliminary support by:
 | |
|  * Melvin Rook, Raymond Ng
 | |
|  *
 | |
|  * This program is free software; you can redistribute it and/or modify
 | |
|  * it under the terms of the GNU General Public License as published by
 | |
|  * the Free Software Foundation; either version 2 of the License, or
 | |
|  * (at your option) any later version.
 | |
|  *
 | |
|  * This program is distributed in the hope that it will be useful,
 | |
|  * but WITHOUT ANY WARRANTY; without even the implied warranty of
 | |
|  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 | |
|  * GNU General Public License for more details.
 | |
|  *
 | |
|  * You should have received a copy of the GNU General Public License
 | |
|  * along with this program; if not, write to the Free Software
 | |
|  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
 | |
|  */
 | |
| 
 | |
| /*
 | |
|  * Driver for the Texas Instruments TMP421 SMBus temperature sensor IC.
 | |
|  * Supported models: TMP421, TMP422, TMP423
 | |
|  */
 | |
| 
 | |
| #include <linux/module.h>
 | |
| #include <linux/init.h>
 | |
| #include <linux/slab.h>
 | |
| #include <linux/jiffies.h>
 | |
| #include <linux/i2c.h>
 | |
| #include <linux/hwmon.h>
 | |
| #include <linux/hwmon-sysfs.h>
 | |
| #include <linux/err.h>
 | |
| #include <linux/mutex.h>
 | |
| #include <linux/sysfs.h>
 | |
| 
 | |
| /* Addresses to scan */
 | |
| static const unsigned short normal_i2c[] = { 0x2a, 0x4c, 0x4d, 0x4e, 0x4f,
 | |
| 					     I2C_CLIENT_END };
 | |
| 
 | |
| enum chips { tmp421, tmp422, tmp423 };
 | |
| 
 | |
| /* The TMP421 registers */
 | |
| #define TMP421_CONFIG_REG_1			0x09
 | |
| #define TMP421_CONVERSION_RATE_REG		0x0B
 | |
| #define TMP421_MANUFACTURER_ID_REG		0xFE
 | |
| #define TMP421_DEVICE_ID_REG			0xFF
 | |
| 
 | |
| static const u8 TMP421_TEMP_MSB[4]		= { 0x00, 0x01, 0x02, 0x03 };
 | |
| static const u8 TMP421_TEMP_LSB[4]		= { 0x10, 0x11, 0x12, 0x13 };
 | |
| 
 | |
| /* Flags */
 | |
| #define TMP421_CONFIG_SHUTDOWN			0x40
 | |
| #define TMP421_CONFIG_RANGE			0x04
 | |
| 
 | |
| /* Manufacturer / Device ID's */
 | |
| #define TMP421_MANUFACTURER_ID			0x55
 | |
| #define TMP421_DEVICE_ID			0x21
 | |
| #define TMP422_DEVICE_ID			0x22
 | |
| #define TMP423_DEVICE_ID			0x23
 | |
| 
 | |
| static const struct i2c_device_id tmp421_id[] = {
 | |
| 	{ "tmp421", 2 },
 | |
| 	{ "tmp422", 3 },
 | |
| 	{ "tmp423", 4 },
 | |
| 	{ }
 | |
| };
 | |
| MODULE_DEVICE_TABLE(i2c, tmp421_id);
 | |
| 
 | |
| struct tmp421_data {
 | |
| 	struct device *hwmon_dev;
 | |
| 	struct mutex update_lock;
 | |
| 	char valid;
 | |
| 	unsigned long last_updated;
 | |
| 	int channels;
 | |
| 	u8 config;
 | |
| 	s16 temp[4];
 | |
| };
 | |
| 
 | |
| static int temp_from_s16(s16 reg)
 | |
| {
 | |
| 	/* Mask out status bits */
 | |
| 	int temp = reg & ~0xf;
 | |
| 
 | |
| 	return (temp * 1000 + 128) / 256;
 | |
| }
 | |
| 
 | |
| static int temp_from_u16(u16 reg)
 | |
| {
 | |
| 	/* Mask out status bits */
 | |
| 	int temp = reg & ~0xf;
 | |
| 
 | |
| 	/* Add offset for extended temperature range. */
 | |
| 	temp -= 64 * 256;
 | |
| 
 | |
| 	return (temp * 1000 + 128) / 256;
 | |
| }
 | |
| 
 | |
| static struct tmp421_data *tmp421_update_device(struct device *dev)
 | |
| {
 | |
| 	struct i2c_client *client = to_i2c_client(dev);
 | |
| 	struct tmp421_data *data = i2c_get_clientdata(client);
 | |
| 	int i;
 | |
| 
 | |
| 	mutex_lock(&data->update_lock);
 | |
| 
 | |
| 	if (time_after(jiffies, data->last_updated + 2 * HZ) || !data->valid) {
 | |
| 		data->config = i2c_smbus_read_byte_data(client,
 | |
| 			TMP421_CONFIG_REG_1);
 | |
| 
 | |
| 		for (i = 0; i < data->channels; i++) {
 | |
| 			data->temp[i] = i2c_smbus_read_byte_data(client,
 | |
| 				TMP421_TEMP_MSB[i]) << 8;
 | |
| 			data->temp[i] |= i2c_smbus_read_byte_data(client,
 | |
| 				TMP421_TEMP_LSB[i]);
 | |
| 		}
 | |
| 		data->last_updated = jiffies;
 | |
| 		data->valid = 1;
 | |
| 	}
 | |
| 
 | |
| 	mutex_unlock(&data->update_lock);
 | |
| 
 | |
| 	return data;
 | |
| }
 | |
| 
 | |
| static ssize_t show_temp_value(struct device *dev,
 | |
| 			       struct device_attribute *devattr, char *buf)
 | |
| {
 | |
| 	int index = to_sensor_dev_attr(devattr)->index;
 | |
| 	struct tmp421_data *data = tmp421_update_device(dev);
 | |
| 	int temp;
 | |
| 
 | |
| 	mutex_lock(&data->update_lock);
 | |
| 	if (data->config & TMP421_CONFIG_RANGE)
 | |
| 		temp = temp_from_u16(data->temp[index]);
 | |
| 	else
 | |
| 		temp = temp_from_s16(data->temp[index]);
 | |
| 	mutex_unlock(&data->update_lock);
 | |
| 
 | |
| 	return sprintf(buf, "%d\n", temp);
 | |
| }
 | |
| 
 | |
| static ssize_t show_fault(struct device *dev,
 | |
| 			  struct device_attribute *devattr, char *buf)
 | |
| {
 | |
| 	int index = to_sensor_dev_attr(devattr)->index;
 | |
| 	struct tmp421_data *data = tmp421_update_device(dev);
 | |
| 
 | |
| 	/*
 | |
| 	 * The OPEN bit signals a fault. This is bit 0 of the temperature
 | |
| 	 * register (low byte).
 | |
| 	 */
 | |
| 	if (data->temp[index] & 0x01)
 | |
| 		return sprintf(buf, "1\n");
 | |
| 	else
 | |
| 		return sprintf(buf, "0\n");
 | |
| }
 | |
| 
 | |
| static umode_t tmp421_is_visible(struct kobject *kobj, struct attribute *a,
 | |
| 				int n)
 | |
| {
 | |
| 	struct device *dev = container_of(kobj, struct device, kobj);
 | |
| 	struct tmp421_data *data = dev_get_drvdata(dev);
 | |
| 	struct device_attribute *devattr;
 | |
| 	unsigned int index;
 | |
| 
 | |
| 	devattr = container_of(a, struct device_attribute, attr);
 | |
| 	index = to_sensor_dev_attr(devattr)->index;
 | |
| 
 | |
| 	if (index < data->channels)
 | |
| 		return a->mode;
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_temp_value, NULL, 0);
 | |
| static SENSOR_DEVICE_ATTR(temp2_input, S_IRUGO, show_temp_value, NULL, 1);
 | |
| static SENSOR_DEVICE_ATTR(temp2_fault, S_IRUGO, show_fault, NULL, 1);
 | |
| static SENSOR_DEVICE_ATTR(temp3_input, S_IRUGO, show_temp_value, NULL, 2);
 | |
| static SENSOR_DEVICE_ATTR(temp3_fault, S_IRUGO, show_fault, NULL, 2);
 | |
| static SENSOR_DEVICE_ATTR(temp4_input, S_IRUGO, show_temp_value, NULL, 3);
 | |
| static SENSOR_DEVICE_ATTR(temp4_fault, S_IRUGO, show_fault, NULL, 3);
 | |
| 
 | |
| static struct attribute *tmp421_attr[] = {
 | |
| 	&sensor_dev_attr_temp1_input.dev_attr.attr,
 | |
| 	&sensor_dev_attr_temp2_input.dev_attr.attr,
 | |
| 	&sensor_dev_attr_temp2_fault.dev_attr.attr,
 | |
| 	&sensor_dev_attr_temp3_input.dev_attr.attr,
 | |
| 	&sensor_dev_attr_temp3_fault.dev_attr.attr,
 | |
| 	&sensor_dev_attr_temp4_input.dev_attr.attr,
 | |
| 	&sensor_dev_attr_temp4_fault.dev_attr.attr,
 | |
| 	NULL
 | |
| };
 | |
| 
 | |
| static const struct attribute_group tmp421_group = {
 | |
| 	.attrs = tmp421_attr,
 | |
| 	.is_visible = tmp421_is_visible,
 | |
| };
 | |
| 
 | |
| static int tmp421_init_client(struct i2c_client *client)
 | |
| {
 | |
| 	int config, config_orig;
 | |
| 
 | |
| 	/* Set the conversion rate to 2 Hz */
 | |
| 	i2c_smbus_write_byte_data(client, TMP421_CONVERSION_RATE_REG, 0x05);
 | |
| 
 | |
| 	/* Start conversions (disable shutdown if necessary) */
 | |
| 	config = i2c_smbus_read_byte_data(client, TMP421_CONFIG_REG_1);
 | |
| 	if (config < 0) {
 | |
| 		dev_err(&client->dev, "Could not read configuration"
 | |
| 			 " register (%d)\n", config);
 | |
| 		return -ENODEV;
 | |
| 	}
 | |
| 
 | |
| 	config_orig = config;
 | |
| 	config &= ~TMP421_CONFIG_SHUTDOWN;
 | |
| 
 | |
| 	if (config != config_orig) {
 | |
| 		dev_info(&client->dev, "Enable monitoring chip\n");
 | |
| 		i2c_smbus_write_byte_data(client, TMP421_CONFIG_REG_1, config);
 | |
| 	}
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static int tmp421_detect(struct i2c_client *client,
 | |
| 			 struct i2c_board_info *info)
 | |
| {
 | |
| 	enum chips kind;
 | |
| 	struct i2c_adapter *adapter = client->adapter;
 | |
| 	const char *names[] = { "TMP421", "TMP422", "TMP423" };
 | |
| 	u8 reg;
 | |
| 
 | |
| 	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
 | |
| 		return -ENODEV;
 | |
| 
 | |
| 	reg = i2c_smbus_read_byte_data(client, TMP421_MANUFACTURER_ID_REG);
 | |
| 	if (reg != TMP421_MANUFACTURER_ID)
 | |
| 		return -ENODEV;
 | |
| 
 | |
| 	reg = i2c_smbus_read_byte_data(client, TMP421_DEVICE_ID_REG);
 | |
| 	switch (reg) {
 | |
| 	case TMP421_DEVICE_ID:
 | |
| 		kind = tmp421;
 | |
| 		break;
 | |
| 	case TMP422_DEVICE_ID:
 | |
| 		kind = tmp422;
 | |
| 		break;
 | |
| 	case TMP423_DEVICE_ID:
 | |
| 		kind = tmp423;
 | |
| 		break;
 | |
| 	default:
 | |
| 		return -ENODEV;
 | |
| 	}
 | |
| 
 | |
| 	strlcpy(info->type, tmp421_id[kind].name, I2C_NAME_SIZE);
 | |
| 	dev_info(&adapter->dev, "Detected TI %s chip at 0x%02x\n",
 | |
| 		 names[kind], client->addr);
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static int tmp421_probe(struct i2c_client *client,
 | |
| 			const struct i2c_device_id *id)
 | |
| {
 | |
| 	struct tmp421_data *data;
 | |
| 	int err;
 | |
| 
 | |
| 	data = kzalloc(sizeof(struct tmp421_data), GFP_KERNEL);
 | |
| 	if (!data)
 | |
| 		return -ENOMEM;
 | |
| 
 | |
| 	i2c_set_clientdata(client, data);
 | |
| 	mutex_init(&data->update_lock);
 | |
| 	data->channels = id->driver_data;
 | |
| 
 | |
| 	err = tmp421_init_client(client);
 | |
| 	if (err)
 | |
| 		goto exit_free;
 | |
| 
 | |
| 	err = sysfs_create_group(&client->dev.kobj, &tmp421_group);
 | |
| 	if (err)
 | |
| 		goto exit_free;
 | |
| 
 | |
| 	data->hwmon_dev = hwmon_device_register(&client->dev);
 | |
| 	if (IS_ERR(data->hwmon_dev)) {
 | |
| 		err = PTR_ERR(data->hwmon_dev);
 | |
| 		data->hwmon_dev = NULL;
 | |
| 		goto exit_remove;
 | |
| 	}
 | |
| 	return 0;
 | |
| 
 | |
| exit_remove:
 | |
| 	sysfs_remove_group(&client->dev.kobj, &tmp421_group);
 | |
| 
 | |
| exit_free:
 | |
| 	kfree(data);
 | |
| 
 | |
| 	return err;
 | |
| }
 | |
| 
 | |
| static int tmp421_remove(struct i2c_client *client)
 | |
| {
 | |
| 	struct tmp421_data *data = i2c_get_clientdata(client);
 | |
| 
 | |
| 	hwmon_device_unregister(data->hwmon_dev);
 | |
| 	sysfs_remove_group(&client->dev.kobj, &tmp421_group);
 | |
| 
 | |
| 	kfree(data);
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static struct i2c_driver tmp421_driver = {
 | |
| 	.class = I2C_CLASS_HWMON,
 | |
| 	.driver = {
 | |
| 		.name	= "tmp421",
 | |
| 	},
 | |
| 	.probe = tmp421_probe,
 | |
| 	.remove = tmp421_remove,
 | |
| 	.id_table = tmp421_id,
 | |
| 	.detect = tmp421_detect,
 | |
| 	.address_list = normal_i2c,
 | |
| };
 | |
| 
 | |
| module_i2c_driver(tmp421_driver);
 | |
| 
 | |
| MODULE_AUTHOR("Andre Prendel <andre.prendel@gmx.de>");
 | |
| MODULE_DESCRIPTION("Texas Instruments TMP421/422/423 temperature sensor"
 | |
| 		   " driver");
 | |
| MODULE_LICENSE("GPL");
 |