The Constant Engine found on gfx6-gfx10 HW has been a notorious source of
problems.
RADV never used it in the first place, radeonsi only used it for a few
releases around 2017 for gfx6-gfx9 before dropping support for it as
well.
While investigating another problem I just recently found that submitting
to the CE seems to be completely broken on gfx9 for quite a while.
Since nobody complained about that problem it most likely means that
nobody is using any of the affected radeonsi versions on current Linux
kernels any more.
So to potentially phase out the support for the CE and eliminate another
source of problems block submitting CE IBs unless it is enabled again
using a debug flag.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
cross-subsystem:
- i2c-hid: Make elan touch controllers power on after panel is enabled
- dt bindings for STM32MP25 SoC
- pci vgaarb: use screen_info helpers
- rust pin-init updates
- add MEI driver for late binding firmware update/load
uapi:
- add ioctl for reassigning GEM handles
- provide boot_display attribute on boot-up devices
core:
- document DRM_MODE_PAGE_FLIP_EVENT
- add vendor specific recovery method to drm device wedged uevent
gem:
- Simplify gpuvm locking
ttm:
- add interface to populate buffers
sched:
- Fix race condition in trace code
atomic:
- Reallow no-op async page flips
display:
- dp: Fix command length
video:
- Improve pixel-format handling for struct screen_info
rust:
- drop Opaque<> from ioctl args
- Alloc:
- BorrowedPage type and AsPageIter traits
- Implement Vmalloc::to_page() and VmallocPageIter
- DMA/Scatterlist:
- Add dma::DataDirection and type alias for dma_addr_t
- Abstraction for struct scatterlist and sg_table
- DRM:
- simplify use of generics
- add DriverFile type alias
- drop Object::SIZE
- Rust:
- pin-init tree merge
- Various methods for AsBytes and FromBytes traits
gpuvm:
- Support madvice in Xe driver
gpusvm:
- fix hmm_pfn_to_map_order usage in gpusvm
bridge:
- Improve and fix ref counting on bridge management
- cdns-dsi: Various improvements to mode setting
- Support Solomon SSD2825 plus DT bindings
- Support Waveshare DSI2DPI plus DT bindings
- Support Content Protection property
- display-connector: Improve DP display detection
- Add support for Radxa Ra620 plus DT bindings
- adv7511: Provide SPD and HDMI infoframes
- it6505: Replace crypto_shash with sha()
- synopsys: Add support for DW DPTX Controller plus DT bindings
- adv7511: Write full Audio infoframe
- ite6263: Support vendor-specific infoframes
- simple: Add support for Realtek RTD2171 DP-to-HDMI plus DT bindings
panel:
- panel-edp: Support mt8189 Chromebooks; Support BOE NV140WUM-N64;
Support SHP LQ134Z1; Fixes
- panel-simple: Support Olimex LCD-OLinuXino-5CTS plus DT bindings
- Support Samsung AMS561RA01
- Support Hydis HV101HD1 plus DT bindings
- ilitek-ili9881c: Refactor mode setting; Add support for Bestar
BSD1218-A101KL68 LCD plus DT bindings
- lvds: Add support for Ampire AMP19201200B5TZQW-T03 to DT bindings
- edp: Add support for additonal mt8189 Chromebook panels
- lvds: Add DT bindings for EDT ETML0700Z8DHA
amdgpu:
- add CRIU support for gem objects
- RAS updates
- VCN SRAM load fixes
- EDID read fixes
- eDP ALPM support
- Documentation updates
- Rework PTE flag generation
- DCE6 fixes
- VCN devcoredump cleanup
- MMHUB client id fixes
- VCN 5.0.1 RAS support
- SMU 13.0.x updates
- Expanded PCIe DPC support
- Expanded VCN reset support
- VPE per queue reset support
- give kernel jobs unique id for tracing
- pre-populate exported buffers
- cyan skillfish updates
- make vbios build number available in sysfs
- userq updates
- HDCP updates
- support MMIO remap page as ttm pool
- JPEG parser updates
- DCE6 DC updates
- use devm for i2c buses
- GPUVM locking updates
- Drop non-DC DCE11 code
- improve fallback handling for pixel encoding
amdkfd:
- SVM/page migration fixes
- debugfs fixes
- add CRIO support for gem objects
- SVM updates
radeon:
- use dev_warn_once in CS parsers
xe:
- add madvise interface
- add DRM_IOCTL_XE_VM_QUERY_MEMORY_RANGE_ATTRS to query VMA count
and memory attributes
- drop L# bank mask reporting from media GT3 on Xe3+.
- add SLPC power_profile sysfs interface
- add configs attribs to add post/mid context-switch commands
- handle firmware reported hardware errors notifying userspace with
device wedged uevent
- use same dir structure across sysfs/debugfs
- cleanup and future proof vram region init
- add G-states and PCI link states to debugfs
- Add SRIOV support for CCS surfaces on Xe2+
- Enable SRIOV PF mode by default on supported platforms
- move flush to common code
- extended core workarounds for Xe2/3
- use DRM scheduler for delayed GT TLB invalidations
- configs improvements and allow VF device enablement
- prep work to expose mmio regions to userspace
- VF migration support added
- prepare GPU SVM for THP migration
- start fixing XE_PAGE_SIZE vs PAGE_SIZE
- add PSMI support for hw validation
- resize VF bars to max possible size according to number of VFs
- Ensure GT is in C0 during resume
- pre-populate exported buffers
- replace xe_hmm with gpusvm
- add more SVM GT stats to debugfs
- improve fake pci and WA kunnit handle for new platform testing
- Test GuC to GuC comms to add debugging
- use attribute groups to simplify sysfs registration
- add Late Binding firmware code to interact with MEI
i915:
- apply multiple JSL/EHL/Gen7/Gen6 workarounds properly
- protect against overflow in active_engine()
- Use try_cmpxchg64() in __active_lookup()
- include GuC registers in error state
- get rid of dev->struct_mutex
- iopoll: generalize read_poll_timout
- lots more display refactoring
- Reject HBR3 in any eDP Panel
- Prune modes for YUV420
- Display Wa fix, additions, and updates
- DP: Fix 2.7 Gbps link training on g4x
- DP: Adjust the idle pattern handling
- DP: Shuffle the link training code a bit
- Don't set/read the DSI C clock divider on GLK
- Enable_psr kernel parameter changes
- Type-C enabled/disconnected dp-alt sink
- Wildcat Lake enabling
- DP HDR updates
- DRAM detection
- wait PSR idle on dsb commit
- Remove FBC modulo 4 restriction for ADL-P+
- panic: refactor framebuffer allocation
habanalabs:
- debug/visibility improvements
- vmalloc-backed coherent mmap support
- HLDIO infrastructure
nova-core:
- various register!() macro improvements
- minor vbios/firmware fixes/refactoring
- advance firmware boot stages; process Booter and patch signatures
- process GSP and GSP bootloader
- Add r570.144 firmware bindings and update to it
- Move GSP boot code to own module
- Use new pin-init features to store driver's private data in a single
allocation
- Update ARef import from sync::aref
nova-drm:
- Update ARef import from sync::aref
tyr:
- initial driver skeleton for a rust driver for ARM Mali GPUs
- capable of powering up, query metadata and provide it to userspace.
msm:
- GPU and Core:
- in DT bindings describe clocks per GPU type
- GMU bandwidth voting for x1-85
- a623/a663 speedbins
- cleanup some remaining no-iommu leftovers after VM_BIND conversion
- fix GEM obj 32b size truncation
- add missing VM_BIND param validation
- IFPC for x1-85 and a750
- register xml and gen_header.py sync from mesa
- Display:
- add missing bindings for display on SC8180X
- added DisplayPort MST bindings
- conversion from round_rate() to determine_rate()
amdxdna:
- add IOCTL_AMDXDNA_GET_ARRAY
- support user space allocated buffers
- streamline PM interfaces
- Refactoring wrt. hardware contexts
- improve error reporting
nouveau:
- use GSP firmware by default
- improve error reporting
- Pre-populate exported buffers
ast:
- Clean up detection of DRAM config
exynos:
- add DSIM bridge driver support for Exynos7870
- Document Exynos7870 DSIM compatible in dt-binding
panthor:
- Print task/pid on errors
- Add support for Mali G710, G510, G310, Gx15, Gx20, Gx25
- Improve cache flushing
- Fail VM bind if BO has offset
renesas:
- convert to RUNTIME_PM_OPS
rcar-du:
- Make number of lanes configurable
- Use RUNTIME_PM_OPS
- Add support for DSI commands
rocket:
- Add driver for Rockchip NPU plus DT bindings
- Use kfree() and sizeof() correctly
- Test DMA status
rockchip:
- dsi2: Add support for RK3576 plus DT bindings
- Add support for RK3588 DPTX output
tidss:
- Use crtc_ fields for programming display mode
- Remove other drivers from aperture
pixpaper:
- Add support for Mayqueen Pixpaper plus DT bindings
v3d:
- Support querying nubmer of GPU resets for KHR_robustness
stm:
- Clean up logging
- ltdc: Add support support for STM32MP257F-EV1 plus DT bindings
sitronix:
- st7571-i2c: Add support for inverted displays and 2-bit grayscale
tidss:
- Convert to kernel's FIELD_ macros
vesadrm:
- Support 8-bit palette mode
imagination:
- Improve power management
- Add support for TH1520 GPU
- Support Risc-V architectures
v3d:
- Improve job management and locking
vkms:
- Support variants of ARGB8888, ARGB16161616, RGB565, RGB888 and P01x
- Spport YUV with 16-bit components
-----BEGIN PGP SIGNATURE-----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=ZVKY
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2025-10-01' of https://gitlab.freedesktop.org/drm/kernel
Pull drm updates from Dave Airlie:
"cross-subsystem:
- i2c-hid: Make elan touch controllers power on after panel is
enabled
- dt bindings for STM32MP25 SoC
- pci vgaarb: use screen_info helpers
- rust pin-init updates
- add MEI driver for late binding firmware update/load
uapi:
- add ioctl for reassigning GEM handles
- provide boot_display attribute on boot-up devices
core:
- document DRM_MODE_PAGE_FLIP_EVENT
- add vendor specific recovery method to drm device wedged uevent
gem:
- Simplify gpuvm locking
ttm:
- add interface to populate buffers
sched:
- Fix race condition in trace code
atomic:
- Reallow no-op async page flips
display:
- dp: Fix command length
video:
- Improve pixel-format handling for struct screen_info
rust:
- drop Opaque<> from ioctl args
- Alloc:
- BorrowedPage type and AsPageIter traits
- Implement Vmalloc::to_page() and VmallocPageIter
- DMA/Scatterlist:
- Add dma::DataDirection and type alias for dma_addr_t
- Abstraction for struct scatterlist and sg_table
- DRM:
- simplify use of generics
- add DriverFile type alias
- drop Object::SIZE
- Rust:
- pin-init tree merge
- Various methods for AsBytes and FromBytes traits
gpuvm:
- Support madvice in Xe driver
gpusvm:
- fix hmm_pfn_to_map_order usage in gpusvm
bridge:
- Improve and fix ref counting on bridge management
- cdns-dsi: Various improvements to mode setting
- Support Solomon SSD2825 plus DT bindings
- Support Waveshare DSI2DPI plus DT bindings
- Support Content Protection property
- display-connector: Improve DP display detection
- Add support for Radxa Ra620 plus DT bindings
- adv7511: Provide SPD and HDMI infoframes
- it6505: Replace crypto_shash with sha()
- synopsys: Add support for DW DPTX Controller plus DT bindings
- adv7511: Write full Audio infoframe
- ite6263: Support vendor-specific infoframes
- simple: Add support for Realtek RTD2171 DP-to-HDMI plus DT bindings
panel:
- panel-edp: Support mt8189 Chromebooks; Support BOE NV140WUM-N64;
Support SHP LQ134Z1; Fixes
- panel-simple: Support Olimex LCD-OLinuXino-5CTS plus DT bindings
- Support Samsung AMS561RA01
- Support Hydis HV101HD1 plus DT bindings
- ilitek-ili9881c: Refactor mode setting; Add support for Bestar
BSD1218-A101KL68 LCD plus DT bindings
- lvds: Add support for Ampire AMP19201200B5TZQW-T03 to DT bindings
- edp: Add support for additonal mt8189 Chromebook panels
- lvds: Add DT bindings for EDT ETML0700Z8DHA
amdgpu:
- add CRIU support for gem objects
- RAS updates
- VCN SRAM load fixes
- EDID read fixes
- eDP ALPM support
- Documentation updates
- Rework PTE flag generation
- DCE6 fixes
- VCN devcoredump cleanup
- MMHUB client id fixes
- VCN 5.0.1 RAS support
- SMU 13.0.x updates
- Expanded PCIe DPC support
- Expanded VCN reset support
- VPE per queue reset support
- give kernel jobs unique id for tracing
- pre-populate exported buffers
- cyan skillfish updates
- make vbios build number available in sysfs
- userq updates
- HDCP updates
- support MMIO remap page as ttm pool
- JPEG parser updates
- DCE6 DC updates
- use devm for i2c buses
- GPUVM locking updates
- Drop non-DC DCE11 code
- improve fallback handling for pixel encoding
amdkfd:
- SVM/page migration fixes
- debugfs fixes
- add CRIO support for gem objects
- SVM updates
radeon:
- use dev_warn_once in CS parsers
xe:
- add madvise interface
- add DRM_IOCTL_XE_VM_QUERY_MEMORY_RANGE_ATTRS to query VMA count
and memory attributes
- drop L# bank mask reporting from media GT3 on Xe3+.
- add SLPC power_profile sysfs interface
- add configs attribs to add post/mid context-switch commands
- handle firmware reported hardware errors notifying userspace with
device wedged uevent
- use same dir structure across sysfs/debugfs
- cleanup and future proof vram region init
- add G-states and PCI link states to debugfs
- Add SRIOV support for CCS surfaces on Xe2+
- Enable SRIOV PF mode by default on supported platforms
- move flush to common code
- extended core workarounds for Xe2/3
- use DRM scheduler for delayed GT TLB invalidations
- configs improvements and allow VF device enablement
- prep work to expose mmio regions to userspace
- VF migration support added
- prepare GPU SVM for THP migration
- start fixing XE_PAGE_SIZE vs PAGE_SIZE
- add PSMI support for hw validation
- resize VF bars to max possible size according to number of VFs
- Ensure GT is in C0 during resume
- pre-populate exported buffers
- replace xe_hmm with gpusvm
- add more SVM GT stats to debugfs
- improve fake pci and WA kunnit handle for new platform testing
- Test GuC to GuC comms to add debugging
- use attribute groups to simplify sysfs registration
- add Late Binding firmware code to interact with MEI
i915:
- apply multiple JSL/EHL/Gen7/Gen6 workarounds properly
- protect against overflow in active_engine()
- Use try_cmpxchg64() in __active_lookup()
- include GuC registers in error state
- get rid of dev->struct_mutex
- iopoll: generalize read_poll_timout
- lots more display refactoring
- Reject HBR3 in any eDP Panel
- Prune modes for YUV420
- Display Wa fix, additions, and updates
- DP: Fix 2.7 Gbps link training on g4x
- DP: Adjust the idle pattern handling
- DP: Shuffle the link training code a bit
- Don't set/read the DSI C clock divider on GLK
- Enable_psr kernel parameter changes
- Type-C enabled/disconnected dp-alt sink
- Wildcat Lake enabling
- DP HDR updates
- DRAM detection
- wait PSR idle on dsb commit
- Remove FBC modulo 4 restriction for ADL-P+
- panic: refactor framebuffer allocation
habanalabs:
- debug/visibility improvements
- vmalloc-backed coherent mmap support
- HLDIO infrastructure
nova-core:
- various register!() macro improvements
- minor vbios/firmware fixes/refactoring
- advance firmware boot stages; process Booter and patch signatures
- process GSP and GSP bootloader
- Add r570.144 firmware bindings and update to it
- Move GSP boot code to own module
- Use new pin-init features to store driver's private data in a
single allocation
- Update ARef import from sync::aref
nova-drm:
- Update ARef import from sync::aref
tyr:
- initial driver skeleton for a rust driver for ARM Mali GPUs
- capable of powering up, query metadata and provide it to userspace.
msm:
- GPU and Core:
- in DT bindings describe clocks per GPU type
- GMU bandwidth voting for x1-85
- a623/a663 speedbins
- cleanup some remaining no-iommu leftovers after VM_BIND conversion
- fix GEM obj 32b size truncation
- add missing VM_BIND param validation
- IFPC for x1-85 and a750
- register xml and gen_header.py sync from mesa
- Display:
- add missing bindings for display on SC8180X
- added DisplayPort MST bindings
- conversion from round_rate() to determine_rate()
amdxdna:
- add IOCTL_AMDXDNA_GET_ARRAY
- support user space allocated buffers
- streamline PM interfaces
- Refactoring wrt. hardware contexts
- improve error reporting
nouveau:
- use GSP firmware by default
- improve error reporting
- Pre-populate exported buffers
ast:
- Clean up detection of DRAM config
exynos:
- add DSIM bridge driver support for Exynos7870
- Document Exynos7870 DSIM compatible in dt-binding
panthor:
- Print task/pid on errors
- Add support for Mali G710, G510, G310, Gx15, Gx20, Gx25
- Improve cache flushing
- Fail VM bind if BO has offset
renesas:
- convert to RUNTIME_PM_OPS
rcar-du:
- Make number of lanes configurable
- Use RUNTIME_PM_OPS
- Add support for DSI commands
rocket:
- Add driver for Rockchip NPU plus DT bindings
- Use kfree() and sizeof() correctly
- Test DMA status
rockchip:
- dsi2: Add support for RK3576 plus DT bindings
- Add support for RK3588 DPTX output
tidss:
- Use crtc_ fields for programming display mode
- Remove other drivers from aperture
pixpaper:
- Add support for Mayqueen Pixpaper plus DT bindings
v3d:
- Support querying nubmer of GPU resets for KHR_robustness
stm:
- Clean up logging
- ltdc: Add support support for STM32MP257F-EV1 plus DT bindings
sitronix:
- st7571-i2c: Add support for inverted displays and 2-bit grayscale
tidss:
- Convert to kernel's FIELD_ macros
vesadrm:
- Support 8-bit palette mode
imagination:
- Improve power management
- Add support for TH1520 GPU
- Support Risc-V architectures
v3d:
- Improve job management and locking
vkms:
- Support variants of ARGB8888, ARGB16161616, RGB565, RGB888 and P01x
- Spport YUV with 16-bit components"
* tag 'drm-next-2025-10-01' of https://gitlab.freedesktop.org/drm/kernel: (1455 commits)
drm/amd: Add name to modes from amdgpu_connector_add_common_modes()
drm/amd: Drop some common modes from amdgpu_connector_add_common_modes()
drm/amdgpu: update MODULE_PARM_DESC for freesync_video
drm/amd: Use dynamic array size declaration for amdgpu_connector_add_common_modes()
drm/amd/display: Share dce100_validate_global with DCE6-8
drm/amd/display: Share dce100_validate_bandwidth with DCE6-8
drm/amdgpu: Fix fence signaling race condition in userqueue
amd/amdkfd: enhance kfd process check in switch partition
amd/amdkfd: resolve a race in amdgpu_amdkfd_device_fini_sw
drm/amd/display: Reject modes with too high pixel clock on DCE6-10
drm/amd: Drop unnecessary check in amdgpu_connector_add_common_modes()
drm/amd/display: Only enable common modes for eDP and LVDS
drm/amdgpu: remove the redeclaration of variable i
drm/amdgpu/userq: assign an error code for invalid userq va
drm/amdgpu: revert "rework reserved VMID handling" v2
drm/amdgpu: remove leftover from enforcing isolation by VMID
drm/amdgpu: Add fallback to pipe reset if KCQ ring reset fails
accel/habanalabs: add Infineon version check
accel/habanalabs/gaudi2: read preboot status after recovering from dirty state
accel/habanalabs: add HL_GET_P_STATE passthrough type
...
[Why]
commit 530694f54d ("drm/amdgpu: do not resume device in thaw for
normal hibernation") optimized the flow for systems that are going
into S4 where the power would be turned off. Basically the thaw()
callback wouldn't resume the device if the hibernation image was
successfully created since the system would be powered off.
This however isn't the correct flow for a system entering into
s0i3 after the hibernation image is created. Some of the amdgpu
callbacks have different behavior depending upon the intended
state of the suspend.
[How]
Use pm_hibernation_mode_is_suspend() as an input to decide whether
to run resume during thaw() callback.
Reported-by: Ionut Nechita <ionut_n2001@yahoo.com>
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4573
Tested-by: Ionut Nechita <ionut_n2001@yahoo.com>
Fixes: 530694f54d ("drm/amdgpu: do not resume device in thaw for normal hibernation")
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Tested-by: Kenneth Crudup <kenny@panix.com>
Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org>
Cc: 6.17+ <stable@vger.kernel.org> # 6.17+: 495c8d3503: PM: hibernate: Add pm_hibernation_mode_is_suspend()
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Add new ioctl DRM_IOCTL_AMDGPU_GEM_LIST_HANDLES.
This ioctl returns a list of bos with their handles, sizes,
and flags and domains.
This ioctl is meant to be used during CRIU checkpoint and
provide information needed to reconstruct the bos
in CRIU restore.
Userspace for this and the next change can be found at
https://github.com/checkpoint-restore/criu/pull/2613
Signed-off-by: David Francis <David.Francis@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
User queues are disabled before GEM objects are released
(protecting against user app crashes).
No races with PCI hot-unplug (because drm_dev_enter prevents cleanup
if iewdevice is being removed).
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When power management is not enabled in the kernel build, the newly
added hibernation changes cause a link failure:
arm-linux-gnueabi-ld: drivers/gpu/drm/amd/amdgpu/amdgpu_drv.o: in function `amdgpu_pmops_thaw':
amdgpu_drv.c:(.text+0x1514): undefined reference to `pm_hibernate_is_recovering'
Make the power management code in this driver conditional on
CONFIG_PM and CONFIG_PM_SLEEP
Fixes: 530694f54d ("drm/amdgpu: do not resume device in thaw for normal hibernation")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20250714081635.4071570-1-arnd@kernel.org
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The variable `pm_suspend_target_state` is conditionally defined only when
`CONFIG_SUSPEND` is enabled (see `include/linux/suspend.h`). Directly
referencing it without guarding by `#ifdef CONFIG_SUSPEND` causes build
failures when suspend functionality is disabled (e.g., `CONFIG_SUSPEND=n`).
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Perry Yuan <perry.yuan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For kernel compute queues, align the timeout with
other kernel queues (10 sec). This had previously
been set higher for OpenCL when it used kernel
queues, but now OpenCL uses KFD user queues which
don't have a timeout limitation. This also aligns
with SR-IOV which already used a shorter timeout.
Additionally the longer timeout negatively impacts
the user experience with kernel queues for interactive
applications.
Reviewed-by: Kent Russell <kent.russell@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
add eeprom data checksum check before driver unload. reset eeprom
and save correct data to eeprom when check failed
Signed-off-by: ganglxie <ganglxie@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For normal hibernation, GPU do not need to be resumed in thaw since it is
not involved in writing the hibernation image. Skip resume in this case
can reduce the hibernation time.
On VM with 8 * 192GB VRAM dGPUs, 98% VRAM usage and 1.7TB system memory,
this can save 50 minutes.
Signed-off-by: Samuel Zhang <guoqing.zhang@amd.com>
Tested-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Link: https://lore.kernel.org/r/20250710062313.3226149-6-guoqing.zhang@amd.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
This reverts commit 5fb90421fa.
The original patch moved `amdgpu_userq_mgr_fini()` to the driver's
`postclose` callback, which is called after `drm_gem_release()` in
the DRM file cleanup sequence.If a user application crashes or aborts
without cleaning up its user queues, 'drm_gem_release()` may free
GEM objects that are still referenced by active user queues, leading
to use-after-free. By reverting, we ensure that user queues are
disabled and cleaned up before any GEM objects are released,
preventing this class of bug. However, this reintroduces a race
during PCI hot-unplug, where device removal can race with per-file
cleanup, leading to use-after-free in suspend/unplug paths.
This will be fixed in the next patch.
Fixes: 5fb90421fa ("drm/amdgpu: fix slab-use-after-free in amdgpu_userq_mgr_fini+0x70c")
Signed-off-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Pass amdgpu device context instead of drm device context to some
amdgpu_device_* functions. DRM device context is not required in those
functions. No functional change.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There is a spelling mistake in a pr_info message. Fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Just use kmalloc for the fences in the rare case we need
an independent fence.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
complete() callbacks are supposed to handle reversing anything
that occurred during prepare() callbacks. They'll be called on every
power state transition, and will also be called if the sequence is
failed (such as an aborted suspend).
Add support for IP blocks to support this action.
Reviewed-by: Alex Hung <alex.hung@amd.com>
Link: https://lore.kernel.org/r/20250602014432.3538345-2-superm1@kernel.org
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add debug mask to disable kernel logs of RAS correctable errors,
including both ACA and CE error counter kernel messages.
Signed-off-by: Xiang Liu <xiang.liu@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The current cleanup order during file descriptor close can lead to
a race condition where the eviction fence worker attempts to access
a destroyed mutex from the user queue manager:
[ 517.294055] DEBUG_LOCKS_WARN_ON(lock->magic != lock)
[ 517.294060] WARNING: CPU: 8 PID: 2030 at kernel/locking/mutex.c:564
[ 517.294094] Workqueue: events amdgpu_eviction_fence_suspend_worker [amdgpu]
The issue occurs because:
1. We destroy the user queue manager (including its mutex) first
2. Then try to destroy eviction fences which may have pending work
3. The eviction fence worker may try to access the already-destroyed mutex
Fix this by reordering the cleanup to:
1. First mark the fd as closing and destroy eviction fences,
which flushes any pending work
2. Then safely destroy the user queue manager after we're certain
no more fence work will be executed
The copy in amdgpu_driver_postclose_kms() needs to be removed (Christian)
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Arvind Yadav <Arvind.Yadav@amd.com>
Signed-off-by: Jesse Zhang <Jesse.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In VM debug mode, it is desirable to notify the application
to correct the freeing sequence by unmapping the memory before
destroying the userptr in the old userptr path. Add a bitmask
to decide whether to send gpu vm fault to the applition.
Signed-off-by: Shane Xiao <shane.xiao@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Set the s3/s0ix and s4 flags in the pm notifier so that we can skip
the resource evictions properly in pm prepare based on whether
we are suspending or hibernating. Drop the eviction as processes
are not frozen at this time, we we can end up getting stuck trying
to evict VRAM while applications continue to submit work which
causes the buffers to get pulled back into VRAM.
v2: Move suspend flags out of pm notifier (Mario)
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4178
Fixes: 2965e6355d ("drm/amd: Add Suspend/Hibernate notification callback support")
Cc: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Adjusted the enforce isolation setting handling to include the ability
to disable the cleaner shader without affecting isolation between tasks.
v2: Updated enforce isolation documentation and parameters. (Alex)
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
s/userqueue/userq/
1. remove the mix of amdgpu_userqueue and amdgpu_userq
2. to be consistent with other amdgpu_userq_fence.c
3. it's shorter
Reviewed-by: Prike Liang <Prike.Liang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Replace disable_kq parameter with user_queue parameter.
The parameter has the following logic:
-1 = auto (ASIC specific default)
0 = user queues disabled
1 = user queues enabled and kernel queues enabled (if supported)
2 = user queues enabled and kernel queues disabled
The default behavior (-1) is currently the same as 0 for current
ASICs. To enable user queues (in addition to kernel queues) set
user_queue=1. To enable user queues and disable kernel queues
(to make all resources available to user queues), set user_queue=2.
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Switch from a bool to an enum and allow more options
for enforce isolation. There are now 3 modes of operation:
- Disabled (0)
- Enabled (serialization and cleaner shader) (1)
- Enabled in legacy mode (no serialization or cleaner shader) (2)
This provides better flexibility for more use cases.
Acked-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
On systems that default to 'deep' some userspace software likes
to try to suspend in 'deep' first. If there is a failure for any
reason (such as -ENOMEM) the failure is ignored and then it will
try to use 's2idle' as a fallback. This fails, but more importantly
it leads to graphical problems.
Forbid this behavior and only allow suspending in the last state
supported by the system.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4093
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://lore.kernel.org/r/20250408180957.4027643-1-superm1@kernel.org
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
On chips that support user queues, setting this option
will disable kernel queues to be used to validate
user queues without kernel queues.
Reviewed-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Similar to KFD, prevent runtime pm while user queues are active.
Reviewed-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When applications closes, it triggers the drm_file_free
function which subsequently releases all allocated buffer
objects. Concurrently, the resume_worker thread will attempt
to map the usermode queue. However, since the wptr buffer
object has already been deallocated, this will result in
an Illegal opcode error being raised in the command stream.
Now replacing drm_release() with a new function
amdgpu_drm_release(). This function will set the flag to
prevent the scheduling of any new queue resume/map, stop
all queues and then call drm_release().
V2:
- Replace drm_release with amdgpu_drm_release(Christian).
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian Koenig <christian.koenig@amd.com>
Reviewed-by: Shashank Sharma <shashank.sharma@amd.com>
Signed-off-by: Arvind Yadav <arvind.yadav@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch introduces new IOCTL for userqueue secure semaphore.
The signal IOCTL called from userspace application creates a drm
syncobj and array of bo GEM handles and passed in as parameter to
the driver to install the fence into it.
The wait IOCTL gets an array of drm syncobjs, finds the fences
attached to the drm syncobjs and obtain the array of
memory_address/fence_value combintion which are returned to
userspace.
v2: (Christian)
- Install fence into GEM BO object.
- Lock all BO's using the dma resv subsystem
- Reorder the sequence in signal IOCTL function.
- Get write pointer from the shadow wptr
- use userq_fence to fetch the va/value in wait IOCTL.
v3: (Christian)
- Use drm_exec helper for the proper BO drm reserve and avoid BO
lock/unlock issues.
- fence/fence driver reference count logic for signal/wait IOCTLs.
v4: (Christian)
- Fixed the drm_exec calling sequence
- use dma_resv_for_each_fence_unlock if BO's are not locked
- Modified the fence_info array storing logic.
v5: (Christian)
- Keep fence_drv until wait queue execution.
- Add dma_fence_wait for other fences.
- Lock BO's using drm_exec as the number of fences in them could
change.
- Install signaled fences as well into BO/Syncobj.
- Move Syncobj fence installation code after the drm_exec_prepare_array.
- Directly add dma_resv_usage_rw(args->bo_flags....
- remove unnecessary dma_fence_put.
v6: (Christian)
- Add xarray stuff to store the fence_drv
- Implement a function to iterate over the xarray and drop
the fence_drv references.
- Add drm_exec_until_all_locked() wrapper
- Add a check that if we haven't exceeded the user allocated num_fences
before adding dma_fence to the fences array.
v7: (Christian)
- Use memdup_user() for kmalloc_array + copy_from_user
- Move the fence_drv references from the xarray into the newly created fence
and drop the fence_drv references when we signal this fence.
- Move this locking of BOs before the "if (!wait_info->num_fences)",
this way you need this code block only once.
- Merge the error handling code and the cleanup + return 0 code.
- Initializing the xa should probably be done in the userq code.
- Remove the userq back pointer stored in fence_drv.
- Pass xarray as parameter in amdgpu_userq_walk_and_drop_fence_drv()
v8: (Christian)
- Move fence_drv references must come before adding the fence to the list.
- Use xa_lock_irqsave_nested for nested spinlock operations.
- userq_mgr should be per fpriv and not one per device.
- Restructure the interrupt process code for the early exit of the loop.
- The reference acquired in the syncobj fence replace code needs to be
kept around.
- Modify the dma_fence acquire placement in wait IOCTL.
- Move USERQ_BO_WRITE flag to UAPI header file.
- drop the fence drv reference after telling the hw to stop accessing it.
- Add multi sync object support to userq signal IOCTL.
V9: (Christian)
- Store all the fence_drv ref to other drivers and not ourself.
- Remove the userq fence xa implementation and replace with
kvmalloc_array.
v10: (Christian)
- Add a comment for the userq_xa xarray
- drop the if check of userq_fence->fence_drv_array
- use the i variable to initialize userq_fence->fence_drv_array_count
- drop the fence reference before you free the array in the error handling,
otherwise it could be that some references leaked.
Signed-off-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Suggested-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Developed a userqueue fence driver for the userqueue process shared
BO synchronization.
Create a dma fence having write pointer as the seqno and allocate a
seq64 memory for each user queue process and feed this memory address
into the firmware/hardware, thus the firmware writes the read pointer
into the given address when the process completes it execution.
Compare wptr and rptr, if rptr >= wptr, signal the fences for the waiting
process to consume the buffers.
v2: Worked on review comments from Christian for the following
modifications
- Add wptr as sequence number into the fence
- Add a reference count for the fence driver
- Add dma_fence_put below the list_del as it might
frees the userq fence.
- Trim unnecessary code in interrupt handler.
- Check dma fence signaled state in dma fence creation
function for a potential problem of hardware completing
the job processing beforehand.
- Add necessary locks.
- Create a list and process all the unsignaled fences.
- clean up fences in destroy function.
- implement .signaled callback function
v3: Worked on review comments from Christian
- Modify naming convention for reference counted objects
- Fix fence driver reference drop issue
- Drop amdgpu_userq_fence_driver_process() function return value
v4: Worked on review comments from Christian
- Moved fence driver allocation into amdgpu_userq_fence_driver_alloc()
- Added detail doc mentioning the differences b/w
two spinlocks declared.
v5: Worked on review comments from Christian
- Check before upcast and remove local variable
- Add error handling in fence_drv alloc function.
- Move rptr read fn outside of the loop and remove WARN_ON in
destroy function.
v6:
- clear the seq64 memory in user fence driver(Christian)
- fix for the wptr va bo mapping(Christian)
- move the fence_drv xa entry erase code from the interrupt handler
into user fence destroy function
Signed-off-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Suggested-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch adds:
- A new IOCTL function to create and destroy
- A new structure to keep all the user queue data in one place.
- A function to generate unique index for the queue.
V1: Worked on review comments from RFC patch series:
- Alex: Keep a list of queues, instead of single queue per process.
- Christian: Use the queue manager instead of global ptrs,
Don't keep the queue structure in amdgpu_ctx
V2: Worked on review comments:
- Christian:
- Formatting of text
- There is no need for queuing of userqueues, with idr in place
- Alex:
- Remove use_doorbell, its unnecessary
- Reuse amdgpu_mqd_props for saving mqd fields
- Code formatting and re-arrangement
V3:
- Integration with doorbell manager
V4:
- Accommodate MQD union related changes in UAPI (Alex)
- Do not set the queue size twice (Bas)
V5:
- Remove wrapper functions for queue indexing (Christian)
- Do not save the queue id/idr in queue itself (Christian)
- Move the idr allocation in the IP independent generic space
(Christian)
V6:
- Check the validity of input IP type (Christian)
V7:
- Move uq_func from uq_mgr to adev (Alex)
- Add missing free(queue) for error cases (Yifan)
V9:
- Rebase
V10: Addressed review comments from Christian, and added R-B:
- Do not initialize the local variable
- Convert DRM_ERROR to DEBUG.
V11:
- check the input flags to be zero (Alex)
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian Koenig <christian.koenig@amd.com>
Reviewed-by: Christian Koenig <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Shashank Sharma <shashank.sharma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch adds IP independent skeleton code for amdgpu
usermode queue. It contains:
- A new files with init functions of usermode queues.
- A queue context manager in driver private data.
V1: Worked on design review comments from RFC patch series:
(https://patchwork.freedesktop.org/series/112214/)
- Alex: Keep a list of queues, instead of single queue per process.
- Christian: Use the queue manager instead of global ptrs,
Don't keep the queue structure in amdgpu_ctx
V2:
- Reformatted code, split the big patch into two
V3:
- Integration with doorbell manager
V4:
- Align the structure member names to the largest member's column
(Luben)
- Added SPDX license (Luben)
V5:
- Do not add amdgpu.h in amdgpu_userqueue.h (Christian).
- Move struct amdgpu_userq_mgr into amdgpu_userqueue.h (Christian).
V6: Rebase
V9: Rebase
V10: Rebase + Alex's R-B
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian Koenig <christian.koenig@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Shashank Sharma <shashank.sharma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add a new parameter to disable BAR resizing. Note that this
only disables the driver from attempting to resize the BAR,
The BIOS may have resized the BAR at boot.
Some teams have found this useful in debugging P2P DMA
issues on systems where the available MMIO space did not allow
for all of the GPUs present to resize their BARs.
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If compiled without SI or CIK support but amdgpu tries to load it
will run into failures with uninitialized callbacks.
Show a nicer message in this case and fail probe instead.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4050
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Add description for debug_mask bit options.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In certain cases, it's desirable to avoid PMFW log transactions to
system memory. Add a mask bit to decide whether to allocate smu pool in
device memory or system memory.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Move to probe so we can check the PCI device type and
only apply the drm_firmware_drivers_only() check for
PCI DISPLAY classes. Also add a module parameter to
override the nomodeset kernel parameter as a workaround
for platforms that have this hardcoded on their kernel
command lines.
Reviewed-by: Kent Russell <kent.russell@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There are a number of systems and cloud providers out there
that have nomodeset hardcoded in their kernel parameters
to block nouveau for the nvidia driver. This prevents the
amdgpu driver from loading. Unfortunately the end user cannot
easily change this. The preferred way to block modules from
loading is to use modprobe.blacklist=<driver>. That is what
providers should be using to block specific drivers.
Drop the check to allow the driver to load even when nomodeset
is specified on the kernel command line.
Reviewed-by: Kent Russell <kent.russell@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The hw supports it.
Signed-off-by: Marek Olšák <marek.olsak@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When userspace invokes S4 the flow is:
1) amdgpu_pmops_prepare()
2) amdgpu_pmops_freeze()
3) Create hibernation image
4) amdgpu_pmops_thaw()
5) Write out image to disk
6) Turn off system
Then on resume amdgpu_pmops_restore() is called.
This flow has a problem that because amdgpu_pmops_thaw() is called
it will call amdgpu_device_resume() which will resume all of the GPU.
This includes turning the display hardware back on and discovering
connectors again.
This is an unexpected experience for the display to turn back on.
Adjust the flow so that during the S4 sequence display hardware is
not turned back on.
Reported-by: Xaver Hugl <xaver.hugl@gmail.com>
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/2038
Cc: Muhammad Usama Anjum <usama.anjum@collabora.com>
Tested-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Link: https://lore.kernel.org/r/20250306185124.44780-1-mario.limonciello@amd.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Prior to the addition of ring reset, the debug option
`debug_disable_soft_recovery` could be used to force a full device
reset. Now that we have ring reset, create a debug option to disable
them in amdgpu, forcing the driver to go with the full device
reset path again when both options are combined.
This option is useful for testing and debugging purposes when one wants
to test the full reset from userspace.
Signed-off-by: André Almeida <andrealmeid@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add extra flag definition for ids_flag field to distinguish
between vf/pf/pt modes
v2: Updated kms driver minor version & removed pf check as default is 0
v3: Fix up version (Alex)
v4: rebase (Alex)
Proposed userspace:
e663bed7d6
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
